Do you need a forklift? Well, it’s quite obvious.The pallet is 1800 pounds,12 feet long, four feet wide. This is an extremely-built custom pallet that we build and manufacture in Dallas.
You need a forklift so no one gets hurt. You need a forklift so you can lift 1800 pounds to your location and move it.
So, why do you need a forklift? It makes life simple.
FAQ
Why do I need a forklift for my 360Booth®?
The custom shipping pallet weighs about 1,800 pounds, so a forklift is needed to move it safely without anyone getting hurt.
How big is the 360Booth pallet?
About 12 feet long and 4 feet wide. 360Booth builds the pallets in Dallas.
Okay, so you’ve purchased a 360Booth®. It’s being installed today, and the question arises, “Where do I store the studio?”
Typically, you put it in the space. More often than not, the studio space that you have for the studio is too small, and my guys have to literally manhandle the pallet outside of the room to another room, so they can start the installation.
The best place to store your studio when it’s delivered, before installation, is close to the studio space but outside the perimeter of the circle.
So. Where do you store your studio? In a dry, warm climate, first of all. Not outside. Next to the space of the install, outside of the studio ring, or diameter.
FAQ
Where should I store my 360Booth® before it's installed?
Indoors in a dry, warm area, close to the installation space but outside the perimeter of the studio’s circle.
Can I store the pallet inside the studio space?
360Booth advises against it. The space is often too small, and the crew then has to move the heavy pallet out before they can start.
How long does it take to ship a 360Booth®? Rather easy in the United States. We use mainstream carriers, and we ship from Dallas, Texas, because we did some thinking initially, and made it centrally located in the United States. It takes three days, anywhere in the United States.
Overseas–Australia, New Zealand, England, South Africa–it takes 30 days. Everything’s taken care of. It’s a super easy process. By the way, overseas? We do the install. No extra fees.
How easy is it to ship in the United States? Simple, easy, three days. No issues.
FAQ
Where does 360Booth® ship from?
360Booth ships from Dallas, Texas, chosen for its central US location, using mainstream carriers.
How long does shipping take in the United States?
About three days to anywhere in the US.
How long does overseas shipping take?
This post says shipping to countries such as Australia, New Zealand, England and South Africa takes about 30 days, and 360Booth handles the install there with no extra fees.
First of all, I can tell you haven’t done your research when you say on the phone, “You’re a turntable. What’s the difference between you and a turntable?”
I’m not a turntable! You push this. It’s that simple.Turntables fail. Electrics fail. Motors fail, and they’re great for a trade show, but not for daily use.
If you already have a turntable, you absolutely need our studio because light is king. You need light. Then you need to harness the power of the light and direct it where you need it on the car. 360Booth® does that with LED lights, dome diffusers, and it’s super easy to push.
Yes, if you have a turntable, you can install 360Booth® around your turntable. We’ve done it over 100 times
FAQ
Is a 360Booth® a turntable?
No. The vehicle stays still and you push the studio’s lighting around it, so there are no motors or electrics to fail.
Why add a 360Booth if I already have a turntable?
360Booth’s view is that light is what matters most. Its studio uses LED lights and dome diffusers to direct light where you need it on the car.
Can a 360Booth be installed around an existing turntable?
Yes. 360Booth says it has done this more than 100 times.
We nearly have 800 studios now, in six years, installed. That’s thousands of lights. I found two lights on my own–the dealer didn’t even know–that were dim. We replaced those two lights out of thousands.
What typically happens is there is a little box tied to it, which we call a driver, or a ballast, that powers the LED light. If your light goes out, contact us as soon as possible. We’ll troubleshoot that really quickly over the phone. It’s most likely a driver. We’ll just overnight it to you at no cost, as long as it’s within five years.
Give us a call, and we’ll resolve the issue.
FAQ
What should I do if a light in my 360Booth® goes out?
Contact 360Booth as soon as possible. The team will troubleshoot with you over the phone.
What usually causes a 360Booth light to fail?
Usually the driver (also called a ballast), the small box that powers the LED light, rather than the LED itself.
Is a replacement covered?
In this post, 360Booth says it will overnight a replacement at no cost as long as it’s within five years.
It’s always about the process. How soon can I get my studio installed and what's the flow? This is simple. I visit every store, without obligation, to measure the space. When I leave, minutes after that, I give what’s called a recap. We go over pricing. I show you the photos, what you need to remove or adjust. I also send you pricing and go over it.
When you are ready, you click on the link, you fill it out, we generate an invoice, we ask for 50% up front before we set an install or shipping date. Once we receive your money, we contact you, set an install and shipping date. We like to ship out five days prior to your install. Your install is typically set on a Monday. You’re done. We train you on Wednesday and deliver it back to you. It’s that simple.
FAQ
What's the process for ordering a 360Booth®?
360Booth visits your store without obligation to measure the space, then gives you a recap with photos, anything that needs adjusting, and pricing. When you’re ready, you fill out the order form and receive an invoice.
How much deposit does 360Booth require?
This post says 360Booth asks for 50% up front before setting an install and shipping date.
When does the studio ship and get installed?
360Booth aims to ship about five days before the install, which is usually set for a Monday, with training and handover on Wednesday.