Can I use strobe lights in a 360Booth®?

by | Oct 21, 2022 | FAQs

Sure you can! I don’t recommend it. The number one reasons are heat and fire. You’re going to be having somebody that doesn’t know how to shoot in a strobe light environment, and they’re going to shoot 40 photos–that’s 40 flashes–in five to six minutes. Strobe lights–that’s a lot of abuse, and when they go, they actually go because of heat, and they fuse to the assembly so now you have the risk of fire. The strobe has failed. Your studio is shut down while you have to order a new strobe light.

So, to answer your question, you can add a strobe absolutely to our studio. We have a dealer group, Morrie’s Automotive Group, in Minnesota, that does a great job with strobes, but they have a professional photographer training their staff. They have five or six of our studios, and every one of them has strobes. They have a strobe above the cloth. They have strobes mounted into the overhang.

I don’t recommend it. It’s too difficult. The light is too soft. Go to Carvana and look at their first photo. It looks fake. It’s because it’s a soft light environment, exactly what strobes will do.

To answer your question, I don’t recommend strobes, but hey, this is your studio. Do anything you want.
 

Where are the motors on your studio?

by | Oct 21, 2022 | FAQs

Great news to you, there are no motors. We wanted a product and a studio that stood the test of time. Motors fail. Electronics fail, let’s be honest. In your back area where the booth is, it’s abused by personnel. It’s abused by moisture and rust. You don’t want motors. Not only that, but turntables also take almost two minutes to turn around. I could have shot and been sitting in the car in about 40 seconds after I was done shooting cars on the exterior. You don’t want motors.

So, to answer your question, where are the motors on 360Booth®? There are none. It’s just a simple wheel.

Let me show you what they look like.

Here’s an extreme closeup of our wheel. We have wheel boxes. Now, just so you know, there are wheel boxes on your Studio that don’t contain wheels. The reason for that is the more wheels, the more resistance, the more friction, the harder it is to push. So, there are no motors on 360Booth®.
 

 

Can I unpack my studio from truck piece by piece if I don't have fork lift?

by | Oct 21, 2022 | FAQs

I wouldn’t advise unpacking your studio from the truck because you don’t have a forklift. The main reason is the plastic. It’s very dense. It’s very durable, but, because of length and the width of it, it’s hard to manhandle, and you’re going to scratch it. I would seriously advise getting a forklift. If you don’t have one, borrow one. If you can’t borrow one, rent one. The ease of getting it off the back of the semi-truck with a forklift is day and night compared to taking all the steel off the pallet and then twenty-something panels of plastic, including supplies.

So, to answer your question, I wouldn’t advise unpacking your pallet piece by piece at all! If you damage a plastic panel, it’s going on your booth, damaged.